Installation method of curtain hooks
There are many kinds of curtain hooks. Stainless steel, crystal, resin, electronic and plastic, and so on. Each material has the characteristics of each material. How to specifically choose how to look at the decoration style.
Hooking method
1. pleat method
In 1, 2, 3, 4 wear, namely: 4 pin four tooth hook respectively alignment mark the serial number on the tape 1234 hole insertion, middle interval, wear third fork; between two hooks every 3-4 holes.
2. traditional pleat traditional method: common
In 1, 2, 4, 5: 4; four pins are inserted into the standard tooth hook tape on the serial number of 1245 holes, separated by 1 holes, wear third fork; between two hooks every 4-6 holes, generally 7 metres per 8 hooks.
3. fold method:
1, 3, 8 in accordance with the recommendations, namely: 9 wear, 4 pins were inserted into the four tooth hook tape on the serial number of 1389 holes, separated by 4 holes, wear third fork; between two hooks every 6-8 holes. This curtain looks a bit like a butterfly shaped pleats. There are also column style, Korean style and South Korea.
No matter what kind of wear, then wear up to top cloth hook holes are fundus, reoccupy finger will play the hook to poke the place up, fold, make it towards a positive, good.
Matters needing attention
The distance between the A. curtain hooks is as uniform as possible and is calculated first.
B. found that a rusty hook changed immediately, or it would pollute the curtain cloth.
In actual use, C. can adjust the number of inserting slots, or 3 or 4, which can adjust the number of slots in every two hooks, so that the effective width of curtain can be adjusted.