How should the telescopic shower cord be installed?
The first step: careful instructions, and check whether the products are complete.
Second step: the shower curtain rod is generally installed at a height of about 2.06 meters from the ground (specific conditions can be determined according to the personal habits, and the height of the bathroom). The shower curtain rod is placed on the need to be installed by the position of a test, determine the drilling location, make a mark.
The third step: drilling on the wall with a drill with a diameter of 12mm (the depth of the drill is about 6cm). When drilling, let the drill bit slightly down, and the rear end of the drill bit slightly up, which can effectively prevent the droop of the shower curtain rod.
The fourth step: put the shreds with the pieces into the wall and tighten the shreds.
The fifth step is to put some glass glue on the cylinder mounted on the part (the purpose of coating glass glue is: first, increase the lubrication and facilitate press mounting; secondly, after the glass glue is solidified, the curtain bar will be more durable).
Sixth step: clean up the wall, wipe off the excess glass glue, after 24 hours, it can be used normally.